4x2 ISUZU 12m to 14m High Altitude Aerial Work Truck with Fold Arm
Folding boom aerial work truck.
1. The worktable is designed with mechanical self-balance, which is used to keep the worktable in balance during operation. The large extension angle of the jib reaches 65 °, so that it can be adjusted to a good working position. (The measurement method of jib extension angle is different, and some manufacturers mark it as 90 °)
2. The upper and lower operating systems can complete various operations on the platform and turntable.
3. Night work light, the operation light can be installed on the operation platform according to the customer's working environment to make night work safer.
4. The outriggers can be adjusted independently. Each outrigger can be adjusted independently according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.
5. The outrigger adopts the front and rear H-shaped structure, with larger stress surface and higher stability; It can prevent the girder from deforming or breaking (note: if the front V and rear H models are used for the outriggers, the girder is likely to deform or break due to the head hanging upside down after a long time of use).
6. The four vertical outrigger cylinders and the upper arm, lower arm and lower arm cylinders are equipped with two-way hydraulic locks, whose function is to lock the cylinder after reaching the required position to prevent accidents. The working arm is equipped with a two-way balance valve to make the operation of the working arm more stable.
Main Technical specification
| The parameters of the truck |
| Item name | Isuzu Hydraulic Aerial Cage Truck |
| Dimension | 7400x2000x3100 mm |
| Total weight | 5600 kg |
| Curb weight | 5275 kg |
| Wheelbase | 3360 mm |
| Chassis brand | ISUZU |
| Tire speficication | 7.00R16 |
| Number of tires | 6 |
| Fuel type | Diesel |
| Engine model | 4KH1CN5HS |
| Engine displacement | 2999 cc |
| Engine power | 96 kw/ 130 hp |
| Engine rate speed | 3400 rpm |
| Engine max torque / speed | 290 N.m at 1500-2900 rpm |
| The Parameters of Equipment |
| Height of platform from the ground | 14 m |
| Platform operation range | ≥7.9 m |
| Operating range at platform operating height | ≥3.1 m |
| Operating height at platform operating range | ≥10.2 m |
| Rated load of platform | 200 kg |
| Support leg | 4 sets, H type, Lateral span 3755 mm, Longitudinal span 3750 mm |
| Lifting hook | Max weight ≤1000kg, saftey 800kg, max height 7.7m |
| Control position | Turntable, cage double working position |
| Control method | Manual hydraulic or electronic control |
| Turning device | Two-way 360 degree |
| ARM structure | 3 section, fold arm |
| Others | Steel tool box and coaming, patterned non - slip table |
ISUZU High Altitude Aerial Cage Truck Picture
ISUZU High Altitude Aerial Cage Truck Exibition
Stock ISUZU High Altitude Aerial Cage Truck Working
Export
